RW-175
Thin-wall, semirigid, fluoropolymer
heat-shrinkable tubing
RW-175 heat-shrinkable tubing is a
tough, semirigid, very-thin-wall
insulation. It is especially suitable for
applications requiring high-temperature
performance, outstanding abrasion
and cut-through resistance, or superior
chemical and solvent properties.
The translucent polyvinylidene fluoride
material permits visual inspection of
covered components.
RW-175 tubing provides
electrical insulation and strain
relief of multipin connectors and
solder joints. It is also widely
used as insulation for high-
temperature components and
heater leads. With its thin-wall
construction, RW-175 is ideal for
applications that require dense
packing of components.
RW-175 provides protection from
most industrial solvents, fuels,
and chemicals – including JP-8,
oxidants, and strong acids. It is
UL-recognized and CSA-certified at
150°C, 600 V, with VW-1 and OFT
flame-retardancy ratings.
Temperature rating
Full recovery temperature: 175°C
Continuous operating temperature: –55°C to 175°C
Recommended maximum temperature for use as a primary insulator: 135°C
Specifications*
a
.
Type Raychem Military UL CSA
RW-175 RW-3029/2 AMS-DTL-23053/8 E35586 VW-1 LR31929 OFT
Colors Standard Translucent (clear)
Nonstandard Black
Size selection Always order the largest size that will shrink snugly over the component being covered.
Nonstandard sizes Sizes of 2 inches and larger are by special order only. In addition, a variety of nonstandard sizes are available.
Standard packaging 4-foot lengths
Ordering description Specify product name, size, and color; for example, RW-175 1/4-X (X=Clear).
Specification values
Property Unit Requirement Method of test
Physical Dimensions mm (inches) See reverse ASTM D 2671
Longitudinal change percent +0, –10 maximum ASTM D 2671
Tensile strength psi (MPa) 5000 (34.5) minimum ASTM D 2671
Ultimate elongation percent 150 minimum ASTM D 2671
Secant modulus (expanded) psi (MPa) 1 x 105 (690) minimum ASTM D 2671
Specific gravity 1.8 maximum ASTM D 2671
Low-temperature flexibility No cracking AMS-DTL-23053/8
(4 hours at –55°C/–67°F)
Heat shock No dripping, flowing, AMS-DTL-23053
(4 hours at 300°C/572°F) or cracking
Heat resistance ASTM D 2671
(168 hours at 250°C/482°F)
Followed by test for:
Ultimate elongation percent 50 minimum ASTM D 2671
Vacuum outgassing ASTM E 595
TML (total mass loss) percent 1.0 maximum
VCM (volatile condensable material) percent 0.1 maximum
Electrical Dielectric strength volts/mil (kV/mm) ASTM D 2671
Sizes 3/64 through 1/2 800 (31.5) minimum
Sizes 3/4 through 2 600 (23.6) minimum
Volume resistivity ohm-cm 1013 minimum ASTM D 2671
Chemical Copper mirror corrosion Noncorrosive ASTM D 2671
(16 hours at 175°C/347°F) Procedure A
Copper contact corrosion No pitting or blackening ASTM D 2671
(168 hours at 175°C/347°F) of copper Procedure B
Followed by test for:
Ultimate elongation percent 100 minimum ASTM D 2671
Flammability seconds 15 maximum ASTM D 2671
(average time of burning) Procedure A
Fungus resistance ISO 846
Followed by tests for: Method B
Tensile strength psi (MPa) 5000 (34.5) minimum ASTM D 2671
Ultimate elongation percent 150 minimum ASTM D 2671
Dielectric strength volts/mil (kV/mm) ASTM D 2671
Sizes 3/64 through 1/2 800 (31,500) minimum
Sizes 3/4 through 2 600 (23,600) minimum
Water absorption percent 0.5 maximum ASTM D 2671
(24 hours at 23°C/73°F)
Fluid resistance ASTM D 2671
(24 hours at 23°C/73°F) in:
JP-8 fuel (MIL-T-5624)
Skydrol 500
Hydraulic fluid (MIL-H-5606)
Aviation gasoline 100/300 (MIL-G-5572)
Salt water (5% salt)
Anti-icing fluid (MIL-A-8243)
Lubricating oil (MIL-L-7808)
Followed by tests for:
Dielectric strength volts/mil (kV/mm) ASTM D 2671
Sizes 3/64 through 1/2 700 (27.6) minimum
Sizes 3/4 through 2 500 (19.7) minimum
Tensile strength psi (MPa) 5000 (34.5) minimum ASTM D 2671
Note: Consult RW-3029/2 for specific details about test procedures.
Skydrol is a trademark of Monsanto Company. Raychem is a trademark of Tyco Electronics Corporation.
Users should independently evaluate the suitability of the product for their application.
Tyco Electronics Corporation
300 Constitution Drive Faraday Road 3816 Noborito, Tama-ku Asia Pacific Headquarters
Menlo Park, CA 94025-1164 Dorcan, Swindon, SN3 5HH Kawasaki, Kanagawa 214-8533 26 Ang Mo Kio, Industrial Park 2
USA United Kingdom Japan Singapore 569507
Tel:(800) 926-2425 (US & Canada) Tel: +44 1793 528171 Tel: +81 44 900 5102 Tel: +65 4866 151
Tel:+1 (650) 361-3860 (All other countries)
All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes
no warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use. Tyco Electronics Corporation’s only obligations are those in the Standard Terms and
Conditions of Sale for these products and in no case will Tyco Electronics Corporation be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of the
product. Tyco Electronics Corporation’s Specifications are subject to change without notice. In addition, Tyco Electronics Corporation reserves the right to make changes in materials or processing
without notification to the Buyer which do not affect compliance with any applicable specification.
For more information about this product visit www.tycoelectronics.com
. 1988, 1995, 2002 Tyco Electronics Corporation Printed in USA 1654048 Rev. 9/05
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
TE Connectivity:
RW-175-1-X-STK RW-175-1/16-X-STK RW-175-3/8-X-STK RW-175-1/2-X-STK 8S23-75FR RW-175-3/64-0-STK
RW-175-1/16-X-SP RW1751/16XSTKCS5405 RW-175-1/4-0-SP RW-175-1/8-X-SP RW-175-3/16-0-STK RW-1753/
16-X-SP RW-175-3/32-0-STK RW-175-3/32-X-SP RW1753/32XSTKCS5405 RW-175-3/64-0-SP RW-175-3/64-XSP
RW-175-3/8-X-SP RW-175-NO.33-X-SP RW-175-3/32-X-STK RW-175-3/64-X-STK RW-175-3/4-X-STK RW175-
1/8-X-STK RW-175-1/4-X-STK RW-175-3/16-X-STK RW-175-1-1/2-X-STK RW-175-2-X-STK RW-175-1/4-X-SP
RW-175-3/4-0-STK RW-175-1/4-0-STK RW-175-1/8-0-SP RW-175-3/4-X-SP RW-175-1-X-SP RW-175-1/16-0-SP
RW-175-3/32-0-SP RW-175-3/8-0-SP RW-175-1/2-0-STK RW-175-1-0-STK RW-175-1/2-X-SP RW-175-3/8-0-STK
RW-175-1-1/2-0-STK RW-175-1/16-0-STK RW-175-3/16-0-SP RW-175-1/8-0-STK
